Saturday, October 5, 2019
Integrate School Safety Data for the Purpose of Safe School Program Essay
Integrate School Safety Data for the Purpose of Safe School Program Evaluation - Essay Example A juvenile offender is held accountable in the system of juvenile system, and once it is found out that he/she has committed an offence, he or she is held responsible through sanctions or consequences of the act, imposed according to the law (Brier, 1995). These consequences or sanctions are applied swiftly, consistently, and surely. They are aimed at providing effective and appropriate responses to different levels of seriousness of the offences and offender work based chronics in order to control, prevent and reduce further violations of law. Therefore, it is important to use such proven programs and the best practices in order to enhance the safety of schools. On the other hand, the procedures for safe school planning have to incorporate all stakeholders; these are teachers, parents, community and the government. Proven Programs and Best Practice Proven programs are ideals that have been successful in their when they have repeatedly been used (Brier). They have yielded positive re sults, shown by environment of safety school. On the other hand, best practice is ideal of management that believes in the presence of a method, technique, activity incentive, reward or process of effectively delivering a certain outcome, unlike any other method, technique or process. These are basically the most effective and efficient in accomplishing a task. They are centered on procedures that have repeatedly proven themselves for many people over time. Aim of Proven School Safety Programs The main aim of proven programs is the enhancement of school safety by ensuring that students are accountable for their behavior. Brier observes that this enables constructive well-conserved development of accountability, together with juvenile offenders programs that are used by agents of law enforcement, or those that are designed by officials of law enforcement to protect schools and student personnel from gang, drug and youth violence. This offers a safe working and learning environment fo r teachers, staff and students, without forgetting the wider community (Trump, 2000). Lack of empirical data has hindered the effectiveness of prevention programs that have demonstrated success signs in school safety. This is because relating collection of such information is seen as using limited resources uneconomically. Schools are therefore rethinking this position, in the aim of improving the success of this program. With increase in the cost of school budgets, funders are not ready to support this program, in prevention of violence, without viable data that clearly shows their promise and effectiveness. Assessment is continued, when the program is running, and changes that allow new developments and improved outcome. Evaluation of such data can effectively be used in support of funding requests for such programs. Safe Schools Safe schools are schools whereby studentsââ¬â¢ violence has been curbed, through the enhancement of studentsââ¬â¢ individual responsibilities. Safe schools provide a peaceful working and learning environment for both teachers and students (Brier). On the other hand, safe school planning refers to the process of creating a safe school. This is made possible through education, disciplinary measures as well as working together with juvenile offenders programs that are used by agents of law enforcement, or those that are designed by officials of law enforcement, that creates cohesive living between students themselves, teachers and community at large. Safe school is achieved
Friday, October 4, 2019
Ted Turner Research Paper Example | Topics and Well Written Essays - 1500 words
Ted Turner - Research Paper Example The research paper "Ted Turner" analyses the leadership qualities of Ted Turner, who is the owner of the Cable Network Channel, CNN. This includes exploring the ways in which he has established the vision in the organization and led people towards realizing that vision. The project explores the unique qualities and attributes of Turner as a leader. Particular reference is drawn in ways in which has realized an unconventional and innovative vision in the organization, his social and ethical concerns towards society, the type of structure and culture he established in the organization and his motivational techniques at the workplace. Ted Turner is a legendary example of an entrepreneurial visionary leader. This is demonstrated by the fact that he could assess and pick up a trend which people would want in the long run. This was the vision behind starting an all-news cable channel which could be accessed by people at any time of the day. CNN, besides being an immense commercial success is also a complete transformation and revolution in the way people avail news from across the globe. After the establishment of the vision, Ted worked towards implementing the vision with tenacity and will. The entrepreneurial visionary leadership of Turner gets reflected through his first purchase of channel 17, a television station in Atlanta which had a weak UHF signal. Industry experts had expected that the plan would fail even before it started. He has been particularly successful in implementing his vision in the organization and influencing his employees in believing. ... This was the vision behind starting an all news cable channel which could be accessed by people at any time of the day. CNN, besides being an immense commercial success is also a complete transformation and revolution in the way people avail news from across the globe. After establishment of the vision, Ted worked towards implementing the vision with tenacity and will. The entrepreneurial visionary leadership of Turner gets reflected through his first purchase of channel 17, a television station in Atlanta which had a weak UHF signal. Industry experts had expected that the plan would fail even before it started. However, the station emerged as a success on Turnerââ¬â¢s application of a certain new technology which eventually revolutionised the television industry. Turner has been particularly successful in implementing his vision in the organization and influencing his employees in believing and realising that vision. Even while the Turner Broadcasting System (TBS) was spreading a cross the country, cable programs were generally regarded as producing old and low rated shows and programs. The industry was expecting for quality content and demanded high from HBO and Turner Broadcasting System. For an individual who hardly watched television programs, Ted Turner had a passion for savvy programming in his television stations. This is partly because he could perceive that which others could not, i.e. the values which lay hidden the old and worn out television movies and shows. He influenced his men and followers to believe that instead of running the shows on rental basis, he should rather own them so that he could run them frequently and as often as he wished to. Establishing this vision in the organization
Thursday, October 3, 2019
Euthyphro & Classics of Philosophy Essay Example for Free
Euthyphro Classics of Philosophy Essay In its simplest term, the divine command theory holds that given that god exists; an act is good only because God commands it. In other words, anything that is not approved of by God cannot be considered to be good. A major problem associated with this view is raised in Euthyphro. The Euthyphro argues that the gods command things because they are good rather than that they are good because they command it. Seen from another angle, the goodness of things precedes Gods command. However, considering the polytheistic nature of the society that Socrates and Euthyphro lived in, the conception that what is good is only good because gods command it may be challenged by holing that the gods may have differences in opinion especially with regard to issues of morality. As such, what may be dear to one god may not necessarily be dear to another. As such, one action may be both pious and impious. The divine command theorists hold that the source of all moral value is the will of God (Hall et al). Whatever is willed by God is morally good or obligatory and whatever he forbids is morally evil. With this regard, murder, theft and adultery are morally wrong because, and only because they are forbidden by God. On the other hand, justice and mercy are morally good only because they are approved by God. The majority of divine command theorists hold that there is no intrinsic Good. Whatever is done and willed by God is good and whatever opposes the will of God is bad. As such, the good has its foundation and existence solely in Gods will. Indeed, it can be conceived that God can alter his mind and command murder. This is especially seen in the scriptures when he commanded Abraham to kill his son. He can also forbid acts of clemency. Simply by an act of will, God can change virtue into vice and vice into virtue. The divine command theory is first broached as a philosophical theory in Euthyphro. Euthyphro and Socrates are attempting to define holiness with Euthyphro proposing a definition that holiness is whatever is loved by the gods. According to Socrates, this definition is ambiguous in the sense that it does not offer any clear comprehension of whether something is holy simply because it is loved by the gods or whether its loved by the gods because it is already holy. By making a generalization from the case of holiness, it can be said that either something is morally good or right because God commands it to be so or that God commands it because it is morally good or right to begin with (Pojman, 2002). In other words, either moral value depends on the will of god or the will of god depends on moral value. In Euthyphro, the two options are dramatically presented. That is, either the source of value depends on the divine will or elsewhere. Both Socrates and Euthyphro agree that it lies elsewhere and therefore reject the divine command theory. They however do not explain where it rests. Platos view is right considering his god-independent Form of the Good. However, the argument in Euthyphro can be hardly applied to the Christian God. Platos argument, as taken by Leibniz and other philosophers may be seen in the following context; that ââ¬Å"honoring ones parents is good because God has commanded itâ⬠implies the counterfactual that if God commanded other things, those other things would be good. God, by the theory, could have commanded those other things considering how powerful He is. According to the divine command theory, therefore, if God had commanded that one should dishonor his parents, then dishonoring parents would be obligatory instead of forbidden (Wilkens, 1995). This is however absurd. The divine command theory is thus committed to counterfactuals about what would have been good that are patently false. The implication is that, even though God commanded the good, this is only so because it is good and not that it is good because He commanded it. The dilemma in the question of whether what is holy is holy because the gods approve of it, or approve of it because it is holy can only be clearer if the polytheistic assumptions are eliminated and the term ââ¬Å"holyâ⬠is replaced with ââ¬Å"rightâ⬠. If the question is restructured, it will appear as follows: does God command us to do what is right because it is right or something is right because God commands it? The question presents two possibilities. First, Godââ¬â¢s commands can be conceived of to be right-indicating or pointing towards rightness. Second, it can be conceived of to be right-making or creating rightness. This question is whether God is viewed as a Supreme Court justice or a legislator. The justice comprehends the statutes and can therefore suggest what should be done for one to stay within the boundaries of the law. However, the law itself is independent of the justice. The legislator on the other hand does not just interpret but also creates law. Until the lawmaker legislates, the law is not in existence. The question thus is; which gives a better conception of God? Voluntarists see God as a legislator since they emphasize on His freedom, will and sovereignty. As such, God is not bounded to the dictates of some standard that He did not create. Instead, right is right because God legislates it. The declaration of God that particular actions are good is right making. This view of God as a legislator evades restricting His freedom and power. However, this may create another problem. If God is so radically free and powerful, could he create a world in which torture is good? If His saying so makes it right and there are no limitations on God, could he decide that rape is virtuous? Affirming this option is frightening since there is a natural inclination to believe that a command that we ought to rape would be morally repugnant, even if it emanated from God (Ross Stratton-Lake 2002). However, there is need to notice its implication. It assumes a standard of goodness that is independent of God. Otherwise we would not have at our disposal anything by which to measure the commands of God. With this regard, a conclusion can be derived that the gods approve of holy (right or goodness) because it is holy (right or good). Holiness is an objective feature of the world and as such, the moral order is just as a fundamental nature of the universe as the spatial or numeric structure of the universe. Our moral attitudes do not make actions good or right. Rather, they are responses to rightness or goodness. What makes our belief that something is good is the property or objective characteristic of being good that it possess. If one defines holiness as meaning what is approved by the gods, one is putting forward a naturalistic definition. If one however defines it as such that it ought to be desired, one is putting forward a non-naturalistic definition. However, both the definitions show that what is good is intrinsic as opposed to what the divine command theorists attempt to postulate. Holiness, goodness or rightness refer to a property or a quality of something and thus, this quality or property cannot be decided by the goods but rather exist independently of the will of the gods. However, there comes a challenge when they refer to a relational property rather than the intrinsic property of the things of which it is predicated. This is the major challenge not only to the divine command theorists but also to Euthyphro. References Plato, Euthyphro Pojman, L. (2002). Classics of Philosophy. Oxford University Press Ross, W. Stratton-Lake, P. (2002). The Right and the Good. Oxford University Press Wilkens, S. (1995). Beyond bumper sticker ethics: an introduction to theories of right wrong. InterVarsity Press
Perforation of Composite Sandwich Panels
Perforation of Composite Sandwich Panels CHAPTER 1 INTRODUCTION 1.1 Introduction The use of sandwich structures has been increasing in recent years because of their lightweight and high stiffness. Commonly, the naval industry and transportation uses the E-glass fibers while the aerospace industry uses composite structures such as carbon fiber. The use of sandwich panels with composite facesheet in the naval industry is particularly appealing because they have better corrosion and environmental resistance and reduced magnetic signatures when compared to double-hull construction steel ships. On the other hand, composite sandwich panels are easily susceptible to damage by a strange object impact. The damage may be visible, penetration or perforation, or invisible, internal delamination and debonding. Both types of damages will result in stiffness and strength reduction. It is then important to study the impact behavior of composite sandwich panels. Failure in composite structures can be caused by low, high and extremely high or localized impact. An impact caused by a foreign body initiates two waves from impact point in a panel: a through-thickness wave and a transverse shear wave. Whether or not these waves play an important role in the impact response of the panel depends on the actual contact duration between the projectile and panel and the time it takes the transverse shear wave to reach the panel boundary. Figures 1.1 (a)-(c) show three-impact scenarios: low-velocity, high-velocity and ballistic impact. In low-velocity impact, the contact force duration is long compared to the time it takes the transverse shear wave travel to reach the plate boundary. Many waves reflect back and forth across the side dimension of the panel. In high-velocity impact, the contact force duration is much shorter than the transverse shear wave travel time through the panel. Usually high-velocity impact is the same with perforation and localized damage of the panel. Ballistic impact deals only with through-thickness wave propagation. During ballistic impact, there is complete perforation of the panel with little or no panel deformation. The contact force duration is approximately the wave travel time through the panel thickness. Ballistic impact usually involves the study of penetration mechanics. Low-velocity High-velocity Ballistic Impact The projectile to panel mass ratio will control whether wave propagation effect dominates the panel impact response and then suggested that a mass ratio be use as a parameter to determine impact response. It was shown that small mass impacts produce more damage than high-mass impacts having same kinetic energy. While small-mass impacts were defined by wave-controlled response, large mass impacts were defined by boundary-controlled response. Common examples of low-velocity impact are of bird strikes, collision with floating object, and dropped tools, may cause damage. Underwater blast or debris from a faraway explosion and air was considered as a high-velocity impact situation. Examples of ballistic impact would be a bullet or fragments from a nearby explosion hitting the panel. Another important factor governing the impact on composite structures is the ballistic limit. The ballistic limit is defined as the highest velocity of the projectile to cause perforation. When the residual velocity (exit) of the projectile is zero, then the initial velocity of the projectile that causes perforation is the ballistic limit of the sandwich panel. The ballistic limit may be calculate analytically or determined experimentally. In the experimental method, sandwich panels are shoot with projectiles over narrow range of velocities to either just cause penetration or to just perforate the panel. There exists a striking velocity at which 50% of the panels are completely perforate above this value and remaining 50% are partly penetrate below this value. This striking velocity is expresse as V50, which is the ballistic limit of the panel. In the analytical approach, the ballistic limit is determined by the conservation of energy principle. The approach is complex because it inc ludes a variety of factors like core thickness, facesheet thickness, shape of the projectile, core crushing stress, and so on. 1.2 Problem Statement This topic was an expansion of the Wan Awis research. He has done only an experimental work. For impact application, we need to predict skin and core material thickness. Since impact phenomena depend on numerous parameters such as material properties or projectile geometry, a numerical model, validated experimentally, is necessary to allow the study of the influence of several parameters without making costly experimental tests. This will definitely enhance the development of our military technology and achievements in the future because of the ability of this software to cut production cost and time consuming of the experimental work. The numerical figures have been compared to modal test results aiming mainly to validate the studies. Simulation based on finite element analysis (FEA) must not exceed à ± 15% error or this simulation could be claimed not acceptable. 1.3 Objective To simulate the damage of composite sandwich structures subjected to high-velocity impact using finite element analysis. To determine the energy absorption capability of the components on the behavior of the sandwich panel under impact load using ANSYS AUTODYN 13.0 To validate a numerical model with actual experiment. 1.4 Scope of Works To characterize a mechanical behavior of carbon fiber panel by using tensile and determine the fiber volume force and density. Design and validate the numerical model. Conduct a ballistic impact test simulation. Using the experiments data to calculate the energy absorption on the impact. CHAPTER 2 LITERATURE REVIEW 2.1 Introduction A great deal of research has been conducted in the area of impact of composite structures. In this chapter, previous work done on the impact response of laminated composite plates and composite sandwich panels will be reviewed. 2.2 Impact of Composite Laminates A detail study of impact of composite laminates in the three impact regimes ballistic impact, low-velocity and high-velocity is presented in this section. 2.2.1 Low-velocity Impact Abrate, 1998 give a specific review on different analytical models of impact on composite laminates. He classified impact models into four groups: impact on infinite plate model, energy balance models, spring-mass models, and complete models. In the energy balance model, the initial kinetic energy of the projectile is used to calculate the deformation of the composite laminate. The velocity of the projectile reaches zero at the maximum deflection of the composite laminate. At this point, all of the kinetic energy of the projectile is converted to strain energy needed to deform the composite laminate. Energy balance model assumes that the structure behaves in quasi-static manner. The time history of force and deflection are obtained using the spring-mass model representing the composite laminate. The model shown in Figure 2.1 consists of nonlinear contact stiffness (K), one spring representing the linear stiffness of the structure (Kbs), another spring for the nonlinear membrane stiff ness (Km), effective mass of the structure (M2) as well as the mass of the projectile (M1). Equations of motion are written from a free body diagram. The infinite plate model is used when the deformation wavefront has not reached the boundary but if the wave reaches the plate boundary then this model is not an appropriate one to use. In the complete model, the dynamics of the structure and projectile are taken into explanation. Appropriate plate theory has to be selected and used. In many cases the classical plate theory can be used but when transverse shear deformations become significant, higher-order theories must be used. One of the earliest studies on the impact of composite laminates was by Goldsmith et al, 1995, who conducted high-velocity and quasi-static impact tests on carbon-fiber laminates by using a cylindro-conical projectile. Three different specimen of varying thickness were considered. Energy balance principle was used to predict the dynamic penetration energy, static penetration energy, and also the ballistic limit of the composite laminate. The fiber failure accounted for most of the energy absorbed. The predicted theoretical energy was in good agreement with measured energy for thin laminates but not for the thick laminates. This was approved to the fact that transverse shear deformation played an important responsibility in thick laminates subjected to low-velocity impact. The effect of transverse shear deformation was not dominant due to its quick occurrence in the high-velocity impact of laminates. Therefore, the predicted energy in the dynamic case was always close to but less than the measured energy for the thin and thick laminates. The predicted ballistic limit was less than measured values due to the nonlinear factors. Cantwell, 2007 studied the influence of target geometry in the low-velocity impact of composite laminate. The tests were performed on GFRP plates with hemispherical indenter on either circular or square supports. He used energy-balance model to predict the plate deflection and the delamination area of the laminated structure. His study stated that there is little or no influence of target geometry on the failure modes. It also suggested that delamination was dependent on interlaminar shear stress and increasing the plate diameter required more energy for damage initiation. Hou et al., 2000 predicted impact damage in composite laminates using LSDYNA 3D. The numerical results were compared to experimental results on low-velocity impact on composite laminate with an initial velocity of 7.08 m/s The Chang-Chang failure criteria was modified taking the shear stress into consideration and the model was implemented in DYNA 3D. 2.2.2 High-velocity Impact In 1988, Cantwell performed high-velocity impact tests of CFRP laminates with 6 mm diameter, 1g steel ball as the projectile. The influence of fiber stacking sequence and target geometry was study. The experiments reveal that varying the target geometry had no significance on initial damage caused. While the damage initiated in the distal facesheet in thin laminates, however, in thick laminates it initiated from incident facesheet. Zhao et al., 2007 investigated the failure modes in composite laminates subjected to high-velocity impact. Three different laminates were subject to impact by hemispherical projectile in the range of 10-300 m/s. An energy balance was considered and equations for residual velocity for the laminates were given in terms of the mass of the projectile and striking velocity. The thickness and stacking sequence were finding to play an important role in the energy absorption. Cheng et al., 2007 developed an analytical model based on the spring-mass model for high-velocity impact of a blunt ended and a sharp-ended projectile on thick composite laminates. They considered the effect of moving boundary due to the propagation of shear wave. The analysis was modeled using series of quasi-static events. At the end of each quasi-static step, the failed layers were remove based on punch shear damage and fiber damage criteria, and the wave front was moved outwards. While the first spring stiffness constant was measure based on the penetration depth of the projectile, the second spring stiffness constant was measured based on the bottom node of the plate. 2.2.3 Ballistic Impact Silva et al., 2005 performed numerical simulations of ballistic impact on thin Kevlar 29 composite laminates using a fragment-simulating projectile. The laminate material model was simulating using AUTODYN and the projectile was modeled using Johnson-Cook strength model. Finite element mesh for both laminate and projectile was generating using True Grid. Accurate predictions of ballistic limit (V50) and the failure modes were made. Ballistic limit is the minimum velocity of impact at which a given projectile just perforates a given target. On occasion, the term is also used to identify the maximum impact velocity at which the projectile can penetrate into the target with perforation. It is often defined statistically as the impact velocity for which the projectile has a 50% probability of perforating the target; it is then denoted by V50. Guild et al., 2007 conducted numerical simulations of ballistic impact on composite laminates and compared them with experimental results. The laminates were made of E-glass/vinyl ester resin with varying thickness and ball bearings of varying mass were use as projectiles. The damage modes included fiber failure, matrix failure, penetration, and delamination. Hashin failure criteria was use to determine the damage mode. Delamination was modeled using an interface between the two plies. As the force increased between two nodes above the specified value, the nodes were untied and the delamination increased. The ballistic limit from experiments was in good agreement with numerical results Naik et al., 2008 studied the ballistic impact behavior of thick composites. E-glass/epoxy laminates of varying thickness were subject to high-velocity impact. The effects of projectile diameter, projectile mass and laminate thickness on the ballistic limit were studied. Wave theory and an energy balance were use to predict the ballistic limit of the laminate. The contact duration of the projectile with the laminate was maximum when the initial velocity was equal to ballistic limit and decreased when the initial velocity increased beyond the ballistic limit. Deka et al., 2008 conducted ballisitic impact on E-glass/polypropylene composite laminates with cylinder-shaped projectiles. The experimental results were validating with numerical analysis using LS-DYNA. Although the laminate was modeling in Hypermesh, LS-DYNA was used to analyze failure mechanisms. The analytical model was base on energy conservation and failure in the numerical analysis was predicted based on Hashins failure criteria. 2.3 Impact of Composite Sandwich Panels In this section, a detail study of impact of composite sandwich panels in the three impact regimes low-velocity, high-velocity and ballistic impact is presented. 2.3.1 Low-velocity Impact Mines et al., 1998 investigated quasi-static loading and low-velocity impact behavior on two different composite sandwich panels. While the first panel was made up of E-glass/vinyl ester skin and Corematà ® core, the second panel was made of Eglass/epoxy skin and aluminium honeycomb core. The first panel with Corematà ® core had failed in the sequence of core shear, debonding, and distal facesheet damage and incident facesheet failure. The second panel failed by core shear, debonding, incident facesheet failure and then distal facesheet failure later. In the low-velocity impact tests, the failure pattern remained the same in both the panels as of the quasi-static tests. The core properties and impact velocity govern the energy absorption capability of the sandwich panel. Wen et al., 1998 investigated the penetration and perforation of composite laminates and sandwich panels under quasi-static, drop-weight and ballistic impact tests by flat-faced, hemispherical-ended and conical-nosed indenters/projectiles. They categorized the impact on laminates and sandwich panels into low-velocity impact and wave-dominated (high-velocity/ballistic impact) response. It was also stated in the research that sandwich panels subjected to low-velocity impact have similar load-displacement characteristics as of quasi-static loading case. The perforation energy required by flat faced projectile was more than hemispherical-ended and conical shaped projectiles in high-velocity impact. Schubel et al., 2005 investigated quasi-static and low-velocity impact behavior of sandwich panels with woven carbon/epoxy facesheets and PVC foam. The low-velocity impact model behaved similar to quasi-static loading case when loads and strain levels were same. The static indentation response was compared to the numerical results obtained using ABAQUS and were in good agreement. A membrane solution, assuming membrane in the core affected region and plate on elastic foundation in the rest of sandwich panel was in poor agreement with the numerical results. Hoo Fatt et al., 2001, developed static and dynamic models of sandwich panels subjected to low-velocity impact. They investigated the behavior of sandwich panels having carbon/epoxy skins and a Nomex honeycomb core with a hemispherical indenter under various support conditions such as simply supported, fully clamped, and rigidly supported. Spring-mass models were considered to determine the load-displacement curve. They also investigated the damage initiation of sandwich panels under low-velocity impact loading. The initial mode of damage depended upon the panel support conditions, projectile nose shape, geometry of the specimens, and material properties of the facesheet and core. Various failure patterns were studied and solutions based on them were derived separately. The analytical solution for the ballistic limit was also found and results for thick laminates were in better agreement than thin laminates. Suvorov et al., 2005 performed numerical analysis on sandwich panels with foam core and studied the effect of interlayer in between the top facesheet and foam core. The foam core was modeled as crushable foam in ABAQUS. While the polyurethane (PUR) interlayer reduced the deformations in both the core and the composite facesheets, the elastomeric foam (EF) interlayer offered a better protection for the foam core alone. Besant et al., 2001 performed numerical analysis on sandwich panels with aluminium honeycomb core. The metal honeycomb core was modeled as elastic perfectly plastic material. A quadratic yield criterion was proposed for the core material, which included both normal and transverse shear stresses. The importance of core plasticity in finite element analysis was explained. 2.3.2 High-velocity Impact A great deal of work has been done in the area of low-velocity impact of laminates and sandwich panels and high-velocity impact of laminates but limited work has been presented in the domain of high-velocity and ballistic impact of sandwich panels. The following describes some recent studies on the high-velocity impact of composite sandwich panels Velmurugan et al., 2006 studied the projectile impact on composite sandwich panels in the range of 30-100 m/s. The sandwich models in this study were not the typical sandwich panels in the conventional sense. They had a core height comparable to the facesheet thickness and acted as a bonding agent between the facesheets. Energy-balance model was used to determine the ballistic limit of three different sandwich panels. They assumed the sandwich panel as a single plate since the foam layer was thin and comparable to facesheet thickness. Also uniform failure mechanism along the through thickness direction was assumed in their model. Skvortsov et al., 2003 developed an analytical model using energy-balance principle to determine the ballistic limit of composite sandwich panels subjected to high velocity impact. Two different sandwich panels were subjected to high velocity impact using three different projectiles. These tests were conducted on simply supported and rigidly supported boundary conditions, and the initial velocity was varied in the range of 70-95 m/s. The predicted panel energy was close to the experimental values and the error was due to the strain-rate effects, plastic behavior, and hardening phenomena, which are not consider in the analysis. 2.3.3 Ballistic Impact Kepler et al., 2007 conducted ballistic impact on sandwich panels consisting of GFRP plates and Divinycell H80 core, with three different projectiles. Lumped spring mass model was use to calculate force histories and panel response. Concentric rings connected by shear springs represented the sandwich panel. In this model, core shear deformation was assumed as the single significant contributor to the sandwich panel stiffness. The facesheet orthotropic was neglected in the panel response. Four different force histories: constant force, triangular force, sine series, and combination of sine and triangular force were used to calculate the energy loss in the panel. Of these, triangular and combined force gave results in better agreement with experimental results. 2.4 Aluminium Honeycomb For design and construction of lightweight transportation systems such as satellites, aircraft, high-speed trains and fast ferries, structural weight saving is one of the major considerations. To meet this requirement, sandwich construction is frequently use instead of increasing material thickness. This type of construction consists of thin two facing layers separated by a core material. Potential materials for sandwich facings are aluminium alloys, high tensile steels, titanium, and composites depending on the specific mission requirement. Several types of core shapes and core material are been applied to the construction of sandwich structures. Among them, the honeycomb core that consists of very thin foils in the form of hexagonal cells perpendicular to the facings is the most popular. A sandwich construction provides excellent structural efficiency, i.e., with high ratio of strength to weight. Other advantages offered by sandwich construction are elimination of welding, superior insulating qualities and design versatility. Even if the concept of sandwich construction is not very new, it has primarily been adopt for non-strength part of structures in the last decade. This is because there are a variety of problem areas to be overcome when the sandwich construction is applied to design of dynamically loaded structures. Other investigators have previously carried out noteworthy theoretical and experimental studies on linear elastic and nonlinear behavior of aluminium sandwich panels. Kelsey et al., 1985 derived simple theoretical expressions of the shear modulus of honeycomb sandwich cores. Witherell, 1977 performed an extensive theoretical study for structural design of an air cushion vehicle hull structure using aluminium honeycomb sandwich panels. Okuto et al., 1991 showed the validity of the so-called equivalent plate thickness method in which a honeycomb sandwich panel subjected to inplane loads is approximately replaced by a single skin panel with equivalent plate thickness. Kobayashi et al., 1994, studied Elasto plastic bending behavior of sandwich panels. An experimental study was undertaken by Yeh et al., 1991 to investigate the buckling strength characteristics of aluminium honeycomb sandwich panels in axial compression. Kunimo et al., 1989 both, have studied the characteristics of the energy absorption capacity of bare honeycomb cores under lateral crushing loads theoretically and experimentally. 2.5 Ballistic Limit The ballistic limit may also be defined as the maximum velocity at which a particular projectile is expected to consistently fail to penetrate armor of given thickness and physical properties at a specified angle of obliquity. Because of the expense of firing tests and the impossibility of controlling striking velocity precisely, plus the existence of a zone of mixed results in which a projectile may completely penetrate or only partially penetrate under apparently identical conditions, statistical approaches are necessary, based upon limited firings. Certain approaches lead to approximation of the V50 Point, that is, the velocity at which complete penetration and incomplete penetration are equally likely to occur. Other methods attempt to approximate the V0 Point, that is, the maximum velocity at which no complete penetration will occur 2.6 Energy Absorption Mechanism of Composite Materials The research was done by Naik and Shrirao at 2004. Impact loads can be categorized into three categories which is low-velocity impact, high-velocity impact and hyper-velocity impact. This classification is made because of change in projectiles velocity will result in different mechanisms in terms of energy transfer between projectile and target, energy dissipation and damage propagation mechanism. Basically, ballistic impact is considered as low-mass high velocity impact. In this impact event, a low-mass projectile is launched by source into target at high velocity. It is unlike low-velocity impact that involved high-mass impactor impacting a target at low velocity. In view of the fact that ballistic impact is high velocity event, the effect is localized and near to impact location. According to Naik et al. (2006), seven possible energy absorbing mechanisms occur at the target during ballistic impact. Those mechanisms are cone formation at the back face of the target, deformation of secondary yarns, tension in primary yarns/fibres, delamination, matrix cracking, shear plugging and friction between the projectile and the target. Then, the researchers formulated all these energies into equation whereby the total energy absorbed by the target is summation of kinetic energy of moving cone EKE, shear plugging ESP, deformation of secondary yarns ED, tensile failure of primary yarns ETF, delamination EDL, matrix cracking EMC and friction energy EF. ETOTALi = EKEi + ESPi + EDi + ETFi + EDLi + EMCi + EFi Mines et al. (1999) identified three modes of energy absorption when analysed the ballistic perforation of composites with different shape of projectile. These energy absorptions are local perforation, delamination and friction between the missile and the target. However, the contribution of friction between the missile and the target in energy absorption is low compared to the other two. In terms of local perforation, three through-thickness regimes can be identified, namely: I shear failure, II tensile failure and III tensile failure and delamination. Out of these three regimes, the through-thickness perforation failure is dominated by shear failure. Similar observation has been made by other researcher for thick graphite epoxy laminates whereby the perforation failure is dominated by shear failure. The third main energy absorption mechanism is delamination. Delamination can propagate under Mode I (tensile) and Mode II (shear) loading and each mode can dominate each other depend ing on structural configuration of the composite as well as material properties. Therefore, it can be predicted that the total perforation energy is a summation of energy absorption due to local perforation, delamination and friction between the missile and the target. Epred = Ef + Esh + Edl where Ef = friction between the missile and the target; Esh = local perforation; Edl = delamination Apart from that, Morye et al. (2000) has studied energy absorption mechanism in thermoplastic fibre reinforced composites through experimental and analytical prediction. They considered three mechanisms that involved in absorbing energy by composite materials upon ballistic impact. The three energy absorption mechanisms are tensile failure of primary yarns, elastic deformation of secondary yarns and the third mechanism is kinetic energy of cone formed at back face of composite materials. They concluded that kinetic energy of the moving cone had a dominant effect as energy absorption mechanism for composite materials. However, they neglected a delamination as one of the factor contributed to the failure of composite materials during ballistic impact. 2.7 Kinetic Energy Equation Kinetic energy (KE) attack is a penetration of the residual energy of a projectile. A projectile can give a certain amount of energy to attack and damage a vehicle if the projectile sufficient residual energy when it arrive at the target. This residual is very important to overmatch the capability and strength of the target material to resist penetration, and then it will penetrate. Kinetic energy shot can be presented with the simple law of physic. K.E = à ½ Mprojectile Vprojectile2 Increasing the mass (Mprojectile) of the shot increases its energy, but the real payoff comes from increasing its velocity (Vprojectile). If the diameter of the shot fills the whole gun barrel, the projectile becomes heavier and difficult to accelerate to required velocity with the length of the barrel. Additionally, a large diameter solid shot will provide more energy to penetrate the armour plate compared to a projectile which has the same mass but a smaller diameter. Consequently, the larger shot is not only less effective at the target but it is difficult to give it the necessary velocity. According to Chang et al., 1990, depth of penetration at the target will depend not only on residual energy, but also on shape and size of the projectile. The curve shape at the projectile head is more important, as it must not only able to pierce the armour but the shoulders of the shot must also support the remainder so that it does not break up on its way through the armour. If for given mass the diameter of the shot is reduced and is length increased, then for the same residual energy the shot will penetrate further, as it is working on a smaller cross section area of armour. The ratio of length-to-diameter is called slenderness ratio. Any projectile with ratio in excess of 7:1 cannot be spin stabilized it is not until they reach a ratio approximately 20:1 that they can call long rod. So, based on those discussions above, we can conclude that energy absorption can be performed by this relation Eabsor = Ein Eout = [à ½ Mprojectile Vin2] [à ½ Mprojectile Vout2] = à ½ Mprojectile (Vin2 Vout2) So, Eabsorbed = à ½ Mprojectile (Vin2 Vout2) 2.8 Tsai-Hill Failure Criterion Hill, 1950 proposed a yield criterion for orthotropic materials: G+HÃÆ'12+F+HÃÆ'22+F+GÃÆ'32-2HÃÆ'1ÃÆ'2-2GÃÆ'1ÃÆ'3-2FÃÆ'2ÃÆ'3+2LÃâ232+2MÃâ132+2NÃâ122=1 This orthotropic yield criterion will be used as an orthotropic strength or failure criterion in the spirit of both criteria being limits of linear elastic behavior. Thus, Hills yield stresses F, G, H, L, M and N will be regarded as failure strengths. Hills criterion is an extension of von Mises yield criterion. The von Mises criterion, in turn, can be related to the amount of energy that is used to distort the isotropic body rather than to change its volume. However, distortion cannot be separated from dilatation in orthotropic materials, so Equation 2.8 is not related to distortional energy. Unfortunately, some authors still mistakenly call the criterion of Tsai-Hill a distortional energy failure criterion. The failure strength parameters F, G, H, L, M and N were related to the usual failure strength X, Y, and S for a lamina by Tsai. If only Ãâ12 acts on the body, then, because its maximum value is S, 2N=1S2 Similarly, if only ÃÆ'1 acts on the body, then G+H=1X2 And if only ÃÆ'2 acts, then F+H=1Y2 If the strength in the 3-direction is denoted by Z and only ÃÆ'3 acts, then F+G=1Z2 Then, upon combination of Equations (2.10), (2.11) and (2.12), the following relations between F, G, H and X, Y, Z result: 2F=1Y2+1Z2-1X2 2G=1X2+1Z2-1Y2 2H=1X2+1Y2-1Z2 For plane stress in the 1-2 plane of a unidirectional lamina with fibers in the 1-direction, ÃÆ'3 = Ãâ13 = Ãâ23 = 0. However, from the cross sectional of such a lamina in Figure 2.3, Y = Z from the obvious geometrical symmetry of the material construction. Thus, Equation (2.8) leads to ÃÆ'12X2-ÃÆ'1ÃÆ'2X2+ÃÆ'22Y2+Ãâ122S2=1 as the governing
Wednesday, October 2, 2019
Stereotyping of Arab Muslims in the New York Times for the Past Forty Y
Stereotyping of Arab Muslims in the New York Times for the Past Forty Years This study examines stereotyping of Arab Muslims in the New York Times for the past forty years. Theorists suggest that stereotyping of a minority group effects the public's opinion of that group. Other communication media theorists say that only under extreme conditions will the negative stereotypes reflect the publics' opinions of the portrayed minority group. The parallel theory between propaganda and stereotyping by the mass media is examined. Theorists including Thomson, (1977) & Myers, (1992), related to mass media effects strongly agree claiming that repetitive and non-contradictive images in the media are an effective form of propaganda. The research samples are random article reviews of the New York Times for the past forty years. Using every fifth year and 2 random numbers ranging from 1 to 12 is used to select an article search date. Islam was the search term. The Gudykunst & Kim( ? ) method of analyzing a stereotype is used to evaluate the 8 New York Times articles. The r esults indicate 95% of the articles were "vague," labeling entire group rather than individual. Out of the total 100%, 70% of the article used unfavorable trait characteristic labeling. Has the New York Times negatively stereotyped Arab Muslims for the past forty years? The goal of this research project is to reveal the negative stereotypes directed towards Arab Muslims in the New York Times. The critical focus of the research is the consistency of the negative stereotypes. The underlying focus is what theoretical and historical effects result from the negative stereotypes. WHAT IS STEREOTYPING? The operational definition is "an idea, expression, lacking in originality or inventiveness. A simplified and standardized conception or image of a person or group held in common by members of a group." (Dictionary). Theorist's Gudykunst & Kim claims the word stereotype originated from an author named Walter Lippman. In this study, the independent variable is the New York Times and the dependent variable is the Islamic religious group. WHO IS A MUSLIM? "And seek assistance through patience and prayer, and most surely it is a hard thing except for the humble ones" (Holy Qur'an 2:45). To announce you are a Muslim, you have to follow the five pillars of Islam that are: 1. Pray five times a... ...994, p.9 Fisher, Glen (1989) Mass media Effects on Sex Role Attitudes of Incarcerated Men. Sex Roles, v20, pp. 191-202. Gerbner, G. (1993). Defense and the Media in Time of Limited War. Armed Forces and Society, v20, pp.147-9. Jowett, G. & O'Donnell, V.(1986). Propaganda and Persuasion. Beverly Hills: Sage Publications. Kahn, K. (1992). Does being male help? The Journal of Politics, v.54, pp.498-512. Lamb, D. (1989). The Arabs: Journey Beyond Mirage. The Middle East Journal, v.43, pp.522. Myers, Philip (1992) The Elastic Body Image. The effect of Television advertising. Journal of Communications, v.42, pp.109-33. Ogawa, D. (1993) The Japanese of Los Angeles. Journal of Asian and African Studies, v19, pp.142-3. Rodwell, J. (1909) Translation of the Koran. New York: Dutton. Shaheen, J. (1985). Media Coverage of the Middle East: Perception of Foreign Policy. The Annals of the American Academy of Political and Social Science, v482, pp. 160-75. Thomson, O. (1977). Mass Persuasion in History. Edinburgh: Paul Harris Publishing. Zillman, Bryant (1982) The Impact of Heavy Viewing of Pornography on Jurors Decision. Journal of Communication, v40, pp.165-7.
Tuesday, October 1, 2019
The Life Of John F. Kennedy :: essays research papers
The Life of John F. Kennedy John F. Kennedy was born in Brookline Massachusetts on May 29, 1917. He attended Harvard University and graduated in 1940. From 1941-1945 he served in the United States Navy, during World War II. In 1946 he was elected to the United States House of Representatives. Then in 1952 he was elected to the United States Senate. On September 12, 1953 he was married to Jacqueline Lee Bouvier. Then in 1960 he was elected President of the United States. On November 22, 1963 he was assassinated in Dallas, Texas. John grew up in Boston, Massachusetts. His father Joseph P. Kennedy, was a self-made millionaire. During the administration of President Franklin D. Roosevelt, he served as the first chairman of the Securities and Exchange Commission, and as United States Ambassador to Great Britain. During John's childhood, his family often moved. Some of these moves sent the family into New York. All of the Kennedy children developed a strong competitive spirit. The boys enjoyed playing touch football together. John Kennedy's education included elementary schools in Brookline and Riverdale. By the age of thirteen his father sent him to the Canterbury School in New Milford, Connecticut. He then transferred to Choate Academy in Wallingford, Connecticut, and graduated in 1935 at eight-teen years old. In 1936, after a summer in England, John entered Princeton University. After Christmas, of that same year, he developed jaundice. Then in 1936 he entered Harvard University. At Harvard he majored in government and international relations. In 1940 he graduated from Harvard. He then enrolled at Stanford University, but dropped out after only six months. After serving in the United States Navy, where he won the Navy and Marine Corps Medal as the skipper of a PT boat in World War II, John decided to enter government. In 1946, he ran for the House of Representatives and won the election over his Republican opponent. He was reelected to the House in both 1948 and 1950. In 1952, he ran for the United States Senate. He defeated his opponent Henry Lodge, who was a popular and experienced legislator. After the 1956 Presidential election he decided to try to run for the upcoming 1960 Presidential election. In 1960 John Kennedy ran in the Presidential Election. His opponent, Richard M. Nixon, was a popular person, he had previously been the vice-president under Dwight Eisenhower. Together they became the first Presidential opponents to debate face-to-face on television. John Kennedy won the election. During his years as president, John helped pass a number of laws. He also established the United States Peace Corps, through
Blondie
Fair and Lovely Human skin color ranges In variety, from the darkest brown to the lightest plank's- white. Recently, I saw a video about skin color In India. I was surprised and devastated . Their skin color affects their status in society there. They can be denied education, jobs etc. A fair skin person is considered attractive regardless that the person have a healthy figure. My shocking discovery was that many Indian people, mostly women are so obsessed with fair skin. They will go to the ends of the Earth to lighter there skin.They believe ark skin complexion is ugly and the lighter guarantees more opportunities in life. For example If you are fair skin there are bigger changes to get married , get better job and better opportunities in life. Issues that dark skin girls face are different for each girl. One girl was told that she Is a dark skin and Just because of that she will not will be wealthy and rich In her life. That her dark skin complexion will not bring her a husband. H ow was she feeling about that?She TLD get too upset because she knew that she will find someone that will like her for who she is. After being rejected couple times finally she found her husband with who now she has family. But not only now, Indian people are having this issue long time ago. Elder people are telling how some of them had been rejected and some of the weddings also been canceled. The girls had been called ugly. One girls said that she was feeling angry but on the end of the day she knows that not only the outside look what is important is inside too, it's the persons heart.One of the way they are trying to get fair skin Is by using fair skin cream. The fairness creams marketing strategies, which show that a girl can't get married unless she Is fair, change the mindset of Individuals. The visual media has changed Its strategy so much that even fair skin people also use fairness products They use different types of cream. One of them is the power brand called Fair and L ovely. Skin lightening products like this one is not Just used locally, the usage goes viral. The advertising they have for the cream is Just amazing .From the way how they are advertising it to the enormous number of users. Most of them tried to light their skin while on the other side the rest of the population face the problem, accepting It and moving on In life. My attention was drawn to the young dark skin boy, the way how he was treated from the people around him, his friends especially from his teachers. He tried to get fair skin with using creams. The influence from his surrounding affected his decision to different from the other kids. Imagine having no friends in school Just because of your skin color? Ewing ashamed of himself not wanting to be social with fear that his errs might beat him up because of his skin color. The way how they talked to him , the influence that it had on him like a young person who is now developing his morals, his personality , his behavior. I am glad that he is not that influenced from the teachers and that and that he has his family support to grow and develop by accepting his dark skin color like straight not weakness. Man also have been influenced by this trend of bleaching skin. They also thing that being like skin can bring you more opportunities in life.They still believe that if you are dark skin you are poor person and no wealthy. Through the different stages this fair skin stereotyping or Colorist has a different effect. From its impact on self-esteem to it impact on career's and marriage. From one side, I believe everyone is free to do whatever they want . On the other side its sad the opinion for fair skin, that only like that people are beautiful, is so deeply ingrained into the culture. Lets something that people from India don't do it for themselves it's about society and pleasing others.
Subscribe to:
Posts (Atom)